The optical loss test kits include a light source, power meter, carry case, adapter cap and operations manual. Other test kit configurations are available on request.

The Noyes optical light sources are designed to be used with optical power meters to perform loss measurements on fibre optic cables. The OLS series offers excellent stability and portability for accurate testing on singlemode or multimode fibre at 660, 850, 1300, 1310, 1550 and 1625nm. Our fibre optic loss test kits are ideal solutions for testing an assortment of multimode and singlemode systems. By joining the Noyes Fiber Systems power meters and light sources in a rugged carry case, measuring optical loss has never been easier. Combine an optical light source with an OPM 1 for basic loss testing, an OPM 4 to add the ability to set a reference, or the OPM 5 to store readings and create computer generated loss reports. For simultaneous loss measurement at dual wavelengths, choose the OLS 6 and OPM 6 test kits.

Optical Power Meters

Light Source

Noyes

Optical Lost Test Kits

The Noyes Fiber Systems OPM series are full featured, palm size optical power meters designed for use with an optical laser source for performing optical loss measurements on fibre optic cables.

The Noyes Fiber Systems OPM series are full featured, palm size optical power meters designed for use with an optical laser source for performing optical loss measurements on fibre optic cables.


Optical Power Meter OPM Series

Noyes

Optical Power Meters

The FPM-8200 Fibre Optic power Meter was designed for general purpose precision power measurements from fibre optic sources and components.

The 8200 features a 75dB dynamic measurement range with a measurement accuracy of 2.5% traceable to NIST calibration standards.

Features:

• Optical power measurement to +1.5 dBm from 800nm to 1600nm
  
• 75dBm of dynamic range with ±0.015 dB linearity over the entire range
  
• NIST -traceable calibration with an accuracy of ±2.5% at reference conditions
  
• Analogue output proportional to measured power
  
• Adapters available for most common fibre optic connectors
  
• IEEE-488 GPIB instrument interface

ILX Lightwave

FPM-8200 Fibre Optic Power Meter

Fibre Optic Power Meters: Competitive, cost-effective fibre optic component manufacturing calls for accurate power measurements that can be easily repeated.

For reliable comparison, the FPM-8210 & FPM-8210H Fibre Optic Power Meters have a single input port for both connectorised and bare fibre measurements. Virtually insensitive to polarisation sate or pattern changes from fibre orientation, these meters deliver repeatable high resolution results.

Features:

• ±0.001db typical polarisation dependent response
  
• Measures up to +33dBm at pump wavelengths (λ ‹ 1000nm)
  
• Single input port for both connectorised and bare fibre measurements
  
• Adapters available for most common fibre optic connectors
  
• Large measurement head for stability on the production bench

ILX Lightwave

FPM-8210 Fibre Optic Power Meter

The OMH-6700B Power Only Measurement Heads provide the flexibility to easily and accurately measure the optical power and wavelength of laser sources from 400nm to 1700nm.

Features:

• Measures power & wavelength from 400nm to 1700nm
  
• NIST traceable calibration
  
• Up to 88dB dynamic range (OMH-6709B)
  
• Integrating sphere-based measurements (except the OMH-6709B)
  
• Silicon and InGaAS photodetector-based models
  
• Free-space and fibre-coupled measurements

ILX Lightwave

OMH-6700B Power Measurement Heads

The OMH-6700B InGaAS Power/Waveheads provide the flexibility to easily and accurately measure the optical power and wavelength of laser sources in NIR spectrum.

Features:

• Measures power & wavelength from 900nm to 1650nm
  
• NIST traceable calibration
  
• Measures up to 10W optical power
  
• Integrating sphere-based measurements
  
• Temperature-controlled InGaAs photodetectors
  
• Free-space and fibre-coupled measurements
  
• Fibre exit port for external measurements (OMH-6780B / OMH-6795B only)

ILX Lightwave

OMH-6700B - InGaAs

The OMH-6700B Silicon Power/Waveheads provide the flexibility to easily and accurately measure the optical power and wavelength of laser sources from blue to NIR colour band.

Features:

• Measures power & wavelength from 350nm to 1100nm
  
• NIST traceable calibration
  
• Measures up to 10W optical power
  
• Integrating sphere-based measurements
  
• Temperature-controlled silicon photodetectors
  
• Free-space and fibre-coupled measurements
  
• Fibre exit port for external measurements (OMH-6780B / OMH-6790B only)

ILX Lightwave

OMH-6700B - Silicon