Enables two-way half duplex wireless data transmission over a range of 500m. It integrates a 10-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use. It uses the 433/434 MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 serial port and configuration is performed by AT commands.

It is suitable for short distance wireless data transmission.

Enables two-way half duplex wireless data transmission over a range of 6000m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use with integrated or remote antenna. It uses the 869MHz / 500mW band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port and configuration is performed by serial commands. It can be used without a license and It is suitable for long distance wireless data transmission applications.

Enables two-way half duplex wireless data transmission over a range of 1500m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use with integrated or remote antenna. It uses the 863/870MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port or USB interface and configuration is performed by AT commands. It can be used without a license and It is suitable for middle distance wireless data transmission applications.

Enables two-way half duplex wireless data transmission over a range of 6000m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use. It uses the 869MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port or USB inetrface and configuration is performed by AT commands. It can be used without a license and It is suitable for long distance wireless data transmission applications.

Because it uses frequency-hopping spread spectrum technology, it provides reliable communication at up to 115.2 Kbps even in RF-hostile environments. ConnexLINK's industrial-grade enclosure contains a robust 2.4 GHz or 900 MHz transceiver. Each ConnexLINK communication system requires a central server node and any number remote client nodes that operate in point-to-point or point-to-multipoint configurations. Users can create multiple sub0networks by assigning unique radio addresses to specific device groups.

Proprietary FHSS technology ensures reliable, secure transmissions even in RF-hostile environments.

The ConnexModem system comprise of a remote node (ConnexPC, which enables local wireless data transmissions) and a telecom node (ConnexModem, which bridges the local wireless link to a telecom system for longer range communication).
Each industrial-grade device utilises an industry-standard interface: the ConnexModem attached to an RJ11 phone jack while the ConnexPC connects to a DB9 RS232 serial port. Both support point-to-point configuration at baud rates up to 115.2 Kbps.